Pilotech Mini Spray Dryer Manufacturer
- Air compressor built-in and it does not need any external device. You just prepare power for it.
- A large number of English papers are available for references.
- The drying chamber, cyclone separator, collection bottle and collection tube are made of high temperature resistant glass, which makes it easy to observe the whole experiment process.
- HD operation instruction videos are available on YOUTUBE, YC-015 mini spray dryer is easy to install and operate.
Pilotech YC-018A inert loop spray dryer (pilot scale organic solvent spray dryer) is capable of processing 4000ML/H, and it is suitable for the spray drying of aqueous solutions and most organic solvents. The YC-018A spray dryer is suitable for the use in the laboratory and pilot plant, and a minimum volume of 100ML is enough to perform one experiment. After the drying process, the materials feature high degree of sphericity and mobility, and the recovery rate of the material can be as high as 92%.
Pilotech YC-500 laboratory spray dryer is small in size and suitable for use on the laboratory table. Its maximum processing capacity is 500ML/H, and a minimum volume of 20ML is enough to perform one experiment. The maximum and minimum inlet air temperature as well as the minimum outlet air temperature for the YC-500 spray dryer are 250 °C, 130 °C and 60 °C respectively. The YC-500 spray dryer can be upgraded to an organic solvent spray dryer with an optional inert loop system, or can be upgraded to a vacuum low temperature spray dryer with an optional vacuum system.
Pilotech YC-501 mini Inert loop spray dryer is a split-type spray dryer, and it is divided into the spray dryer main machine and the inert loop system. The main machine is used for drying the spray of aqueous solutions. After being connected to the nitrogen circulation system, it is able to spray dry of most organic solvents. The YC-501 spray dryer is capable of processing 500ML per hour. It is small in size as it occupies less than one square meter and it is easy to install and operate.
Pilotech YC-015A mini Inert loop spray dryer is used for quick and safe drying of laboratory organic solvents and aqueous solutions. It is capable of processing 1500ML per hour, and it only needs 50ML to perform one experiment. The YC-015A mini Inert loop spray dryer has a built-in oxygen monitoring system. When the oxygen concentration is higher than the preset value for safe operation, the system will not start or cease to operate automatically, which will ensure the safety of your laboratory.
Pilotech YC-015 mini spray dryer has the built-in air compressor, and the storage tank of compressor is made of SUS304 stainless steel. The drying chamber, cyclone separator, collection bottle and collection tube are made of high temperature resistant glass, it easy to observe the whole experiment process, and adjust the process parameters of the spray drying at real time. The YC-015 mini spray dryer is capable of processing 1500ML per hour, and it only needs 30ML to perform one experiment.
Pilotech YC-018 lab spray dryer is capable of processing 3500ML per hour, and it only needs a minimum amount of 100ML materials to perform one experiment. Is suitable both for laboratory use and the pilot plant use. The inlet air temperature for the YC-018 laboratory spray dryer ranges from 110 to 350 °C. As the range is relatively wide, it is suitable for drying the spray of most materials. After the drying process, the particle size ranges from 1 to 100 microns, so it is suitable for the spray drying of ceramics and catalysts.
The minimum inlet air temperature for Pilotech YC-1800 low temperature spray dryer is 105 °C, and it is suitable for the spray drying of heat-sensitive materials such as enzyme preparations and sugary materials such as the traditional Chinese medicine extracts. After the drying process, the materials will not stick to the wall. Pilotech YC-018 spray dryer has the drying chamber which is the mixture of the high temperature resistant glass and the SUS304 stainless steel, so it is both durable and easy to observe the experimental process. The YC-1800 spray dryer can also be equipped with fluidized bed drying function for multiple uses.
The YC-2000 mini vacuum spray dryer introduces the vacuum system into the spray drying process, which significantly reduces the inlet and outlet temperatures of the spray. The minimum inlet air temperature is 50 °C and the processing capacity is 1500 ML/H. It is suitable for the spray drying of high polymer material which is not heat resistant such as the probiotic enzyme preparations in the laboratory. We also offer the vacuum spray dryers which have the capacity of 500ML/H and 3500ML/H.
The YC-019 mini spray dryer has a maximum processing capacity of 5L/H and a minimum material volume of 50ML. It can be used for spray drying of trace materials in the laboratory or in the pilot workshop. YC-019 mini spray dryer, small size, occupying only one square meter, low noise, less than 60DB, material recovery rate up to 92%.